Rest assured that Switch On always offers you the best prices

he threw the switch on the tape recorder →

Switch On prides itself on a professional install and disposal offering to customers
Our Swithches
Too low to display
To change your settings, go to Settings  General  Accessibility  Switch Control. Then make your changes:

Skuleer(TM)Mini Swithch 12mm 3V Momentary On/Off Push Button Switch Car Auto Boat Led Switch Circuit Control Electrical Modifications

Too low to display
  • Review
  • TAG : Welcome - Victorian Energy Compare - Switch On Victoria
  • Switching on a variable set as $var="08" and forgetting the quotes within the case results in different behavior depending on the two digit number the variable is set to.

    This last equivalent sample show you that each case expressions is evaluated, until one of them evaluates to a value equal (==) to the switch expression. Above, the error() code will only be called if one of the check evaluates to false. And the valid() code will only be evaluated only if the switch reach the default, which means that none of the above check returned false...

  • I have a pool light switch that has white and black wires i got new light switch for new LED light and switch instructions say white to white, red to red, black to black. How should I connect it? Thanks

    I have a 20 amp breaker, when i turn the switch on it trips the breaker. The switch is a 2 pole switch & nothing is connected to it. I have tried 3 different switches & 2 different breakers. Why is this happening?

    08-30-2014, 05:08 PM   #1
    Junior Member
    Join Date: Aug 2014
    Posts: 51
    Reputation power: 2
    ON/OFF vs Momentary toggles?

    Question for all you pit-builders or anyone with their own control panels & switchboards.

    When using physical ON/OFF switches (that flip between two fixed-positions) with a flight sim, do you guys find it a pain to have to re-set these switches to proper positions every time you restart a game or re-spawn? i.e. let's say you do an air-start, you'd have to memorize what the default air-start switch positions are for that plane, and make sure your physical switches are set for those before you start the game. Otherwise your switches might say "OFF" when they're really "ON" and you have to flip them twice.

    If you had your druthers, would you use all momentary toggles instead? So at any time you could press the switch ON or OFF and not have to worry about this? Or do you prefer the realism of having an ON/OFF toggle just like the one in a real cockpit?

    Just curious! Might influence what panel I buy in the near future.

  • up vote 0 down vote

    In some cases whether lights come on or not is not helpful. Some car battery chargers have lights which come on if the battery is partly charged, and the light indicators hardly change depending on the switch position. It is therefore essential to "think" in binary, which as noted, not everyone does. Hence some people will keep coming back to this or similar sites to check.

    share|improve this answer

    I have s double light switch that works an outlet and an outside light. After replacing the outside light fixture both the light and outlet stopped working. The outside light worked fine for a day then began to flicker and everything went out. I replaced both switches and the outlet. The box for the switches has two grounds, 3 white (neutral), and 3 black (leads). 1 lead splices and goes to the hot on each switch. The other two black wires go to the bottom silver screws. The 3 whites are coupled together with a connector cap. I am getting roughly 120-123 volts on each black but nothing through the neutral when the lights are switched to on. The outlet nor the outside light will work. I have no idea where to go from here.

Switch on to disability in the workplace | Jaluch

The number of poles on a switch defines how many separate circuits the switch can control. So a switch with one pole, can only influence one single circuit. A four-pole switch can separately control four different circuits.